Daikin 9 kW and up split systems
10
models on the register
Short answer
10 Daikin 9 kW and up split systems are registered for sale in Australia in 2026, from 9 to 10 kW. Supplied and installed, most land between $3,400 to $4,800; up to three licensed local installers will quote your actual job.
Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.
Compare 3 quotes for my houseAt a glance
- Models10
- Installed, estimate$3,400–$4,800
- Quietest indoorsDaikin FTXC100AV1A65 dB(A), 10 kW
- Most efficient (average zone)Daikin FTXV90WVMA3 cooling stars, 9 kW
- Reverse cycle80%heat and cool
- R32 refrigerant100%the current low-GWP standard
9 kW and up
10 models · installed $3,400–$4,800
| Model (outdoor / indoor) | Type | Cool kW | Heat kW | Cool stars | Heat stars | Indoor dB | Installed, estimate | Quote |
|---|---|---|---|---|---|---|---|---|
| RXV90WVMA / FTXV90WVMA | Wall split | 9 | 10.3 | 3★ | 2★ | 69 | $3,400–$4,800 | Get quotes |
| RKM95P2VMA / FTKM95P2VMA | Wall split, cooling only | 9.4 | – | 2.5★ | – | 69 | $3,400–$4,800 | Get quotes |
| RXM95P2VMA / FTXM95P2VMA | Wall split | 9.4 | 10.3 | 2.5★ | 2★ | 69 | $3,400–$4,800 | Get quotes |
| RXV95L2VMA / FTXV95L2VMA | Wall split | 9.4 | 10.3 | 2★ | 2★ | 69 | $3,400–$4,800 | Get quotes |
| RKM95WVMA / FTKM95WVMA | Wall split, cooling only | 9.5 | – | 3★ | – | 67 | $3,400–$4,800 | Get quotes |
| RXM95WVMA / FTXM95WVMA | Wall split | 9.5 | 10.3 | 3★ | 2★ | 67 | $3,400–$4,800 | Get quotes |
| RXC100A2V1A / FTXC100AV1A +1 variant with the same ratings | Wall split | 10 | 11.2 | 2.5★ | 2★ | 65 | $3,400–$4,800 | Get quotes |
| RZAV100C2Y1 / FAA100BAVMA +1 variant with the same ratings | Wall split | 10 | 11.2 | 2.5★ | 2★ | – | $3,400–$4,800 | Get quotes |
Every model on the Energy Rating register marked available in Australia. Stars are the zoned label for the average climate zone (average zone); indoor noise is the registered sound power level, measured the same way for every model. Installed prices are estimated 2026 supply-and-install ranges, not quotes (how we estimate them); your installer confirms the number. Browse and filter everything in the full catalogue.
FAQ
Daikin 9 kW and up split systems: common questions
How much does a Daikin 9 kW and up split system cost installed?
Typically $3,400 to $4,800 supplied and installed in 2026, depending on size and the job. 9 kW and up: $3,400 to $4,800. Pipe runs, a new circuit or a second storey add to it. Get up to three local quotes for your actual job.
Which is the quietest Daikin 9 kW and up split systems?
On the registered indoor sound level, the Daikin FTXC100AV1A (10 kW) is the quietest at 65 dB(A). Compare within the same size: bigger units are louder. See the quietest split systems ranking.
Which is the most energy efficient?
For the average climate zone, the Daikin FTXV90WVMA (9 kW) has the highest cooling rating here at 3 stars. Star ratings on the zoned label run to 10, and a star is worth more in a hot zone than a mild one. For cold-climate heating, the Daikin FTXV90WVMA leads at 1.5 stars.
What size split system do I need?
Roughly 2.5 kW for a bedroom, 3.5 kW for a large bedroom or small living room, and 5 to 7.1 kW for open-plan living. West glass and poor insulation push it up. Use the size calculator for your room.
Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.
Get quotes for your air con
Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.
Compare 3 quotes