Daikin Zena logo

Daikin Zena

24

models on the register

Daikin Zena range in Australia: all 24 registered sizes with capacity, star ratings and noise, plus typical installed prices. Compare up to 3 local quotes.
Daikin Zena indoor unit
Image: Daikin

Short answer

24 Daikin Zena models are registered for sale in Australia in 2026, from 2.5 to 6 kW. Supplied and installed, most land between $1,500 to $3,600; up to three licensed local installers will quote your actual job.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Zena is Daikin's designer wall split, sold in a white or black wood-look finish. It suits bedrooms and living rooms up to about 6 kW where looks matter as much as performance.

At a glance

2.5 kW

6 models · installed $1,500–$2,500 · size page

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
RXJ25T2VMA / FTXJ25T2VMA* +5 variants with the same ratings Wall split 2.5 3.2 3.5★ 3★ 56 $1,500–$2,500 Get quotes

3.5 kW

6 models · installed $1,700–$2,700 · size page

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
RXJ35T2VMA / FTXJ35T2VMA* +5 variants with the same ratings Wall split 3.5 3.7 3.5★ 2.5★ 58 $1,700–$2,700 Get quotes

5.0 kW

6 models · installed $2,100–$3,300 · size page

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
RXJ50T2VMA / FTXJ50T2VMA* +2 variants with the same ratings Wall split 5 6 3★ 2.5★ 61 $2,100–$3,300 Get quotes
RXJ50TVMA / FTXJ50TVMA* +2 variants with the same ratings Wall split 5 6 3★ 2.5★ 61 $2,100–$3,300 Get quotes

6.0 kW

6 models · installed $2,400–$3,600 · size page

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
RXJ60T2VMA / FTXJ60T2VMA* +5 variants with the same ratings Wall split 6 7.2 2.5★ 2.5★ 64 $2,400–$3,600 Get quotes

Every model on the Energy Rating register marked available in Australia. Stars are the zoned label for the average climate zone (average zone); indoor noise is the registered sound power level, measured the same way for every model. Installed prices are estimated 2026 supply-and-install ranges, not quotes (how we estimate them); your installer confirms the number. Browse and filter everything in the full catalogue.

FAQ

Daikin Zena: common questions

How much does a Daikin Zena model cost installed?

Typically $1,500 to $3,600 supplied and installed in 2026, depending on size and the job. 2.5 kW: $1,500 to $2,500; 3.5 kW: $1,700 to $2,700; 5.0 kW: $2,100 to $3,300; 6.0 kW: $2,400 to $3,600. Pipe runs, a new circuit or a second storey add to it. Get up to three local quotes for your actual job.

Which is the quietest Daikin Zena models?

On the registered indoor sound level, the Daikin FTXJ25T2VMA* (2.5 kW) is the quietest at 56 dB(A). Compare within the same size: bigger units are louder. See the quietest split systems ranking.

Which is the most energy efficient?

For the average climate zone, the Daikin FTXJ25T2VMA* (2.5 kW) has the highest cooling rating here at 3.5 stars. Star ratings on the zoned label run to 10, and a star is worth more in a hot zone than a mild one. For cold-climate heating, the Daikin FTXJ25T2VMA* leads at 2.5 stars.

What size split system do I need?

Roughly 2.5 kW for a bedroom, 3.5 kW for a large bedroom or small living room, and 5 to 7.1 kW for open-plan living. West glass and poor insulation push it up. Use the size calculator for your room.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes