Daikin logo

Daikin 6.0 kW split systems

31

models on the register

Every current Daikin 6.0 kW split system in Australia compared on stars, noise and heating, with the typical installed price. Get up to 3 local quotes.

Short answer

31 Daikin 6.0 kW split systems are registered for sale in Australia in 2026, all rated at 6 kW. Supplied and installed, most land between $2,400 to $3,600; up to three licensed local installers will quote your actual job.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

At a glance

6.0 kW

31 models · installed $2,400–$3,600

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
DRXF60T2VMA / DTXF60T2VMA +1 variant with the same ratings Wall split 6 6.5 2.5★ 2★ 62 $2,400–$3,600 Get quotes
RKF60T2VMA / FTKF60T2VMA +1 variant with the same ratings Wall split, cooling only 6 – 3★ – 62 $2,400–$3,600 Get quotes
RKM60Q2VMA / FTKM60Q2VMA +1 variant with the same ratings Wall split, cooling only 6 – 4★ – 64 $2,400–$3,600 Get quotes
RKM60W2VMA / FTKM60W2VMA Wall split, cooling only 6 – 4.5★ – 64 $2,400–$3,600 Get quotes
RKM60WVMA / FTKM60WVMA Wall split, cooling only 6 – 4.5★ – 64 $2,400–$3,600 Get quotes
RXC60A1V1A / FTXC60AV1A +1 variant with the same ratings Wall split 6 7.1 2★ 2.5★ 61 $2,400–$3,600 Get quotes
RXC60A2V1A / FTXC60AV1A +2 variants with the same ratings Wall split 6 7.1 2★ 2.5★ – $2,400–$3,600 Get quotes
RXF60AVMA / FTXF60AVMA Wall split 6 6.5 3.5★ 2.5★ 62 $2,400–$3,600 Get quotes
RXF60W1VMA / FTXF60W1VMA +2 variants with the same ratings Wall split 6 6.5 3.5★ 2★ 62 $2,400–$3,600 Get quotes
RXJ60T2VMA / FTXJ60T2VMA* +5 variants with the same ratings Wall split 6 7.2 2.5★ 2.5★ 64 $2,400–$3,600 Get quotes
RXM60AVMA / FTXM60AVMA +1 variant with the same ratings Wall split 6 7.2 4.5★ 3★ 64 $2,400–$3,600 Get quotes
RXM60W2VMA / FTXM60W2VMA Wall split 6 7.2 4.5★ 3★ 64 $2,400–$3,600 Get quotes
RXV60AVMA / FTXV60AVMA +3 variants with the same ratings Wall split 6 7.2 4★ 3★ 64 $2,400–$3,600 Get quotes
RXV60UVMA / FTXV60UVMA Wall split 6 7.2 3.5★ 2.5★ 64 $2,400–$3,600 Get quotes

Every model on the Energy Rating register marked available in Australia. Stars are the zoned label for the average climate zone (average zone); indoor noise is the registered sound power level, measured the same way for every model. Installed prices are estimated 2026 supply-and-install ranges, not quotes (how we estimate them); your installer confirms the number. Browse and filter everything in the full catalogue.

FAQ

Daikin 6.0 kW split systems: common questions

How much does a Daikin 6.0 kW split system cost installed?

Typically $2,400 to $3,600 supplied and installed in 2026, depending on size and the job. 6.0 kW: $2,400 to $3,600. Pipe runs, a new circuit or a second storey add to it. Get up to three local quotes for your actual job.

Which is the quietest Daikin 6.0 kW split systems?

On the registered indoor sound level, the Daikin FTXC60AV1A (6 kW) is the quietest at 61 dB(A). Compare within the same size: bigger units are louder. See the quietest split systems ranking.

Which is the most energy efficient?

For the average climate zone, the Daikin FTKM60W2VMA (6 kW) has the highest cooling rating here at 4.5 stars. Star ratings on the zoned label run to 10, and a star is worth more in a hot zone than a mild one. For cold-climate heating, the Daikin FTXM60AVMA leads at 2.5 stars.

What size split system do I need?

Roughly 2.5 kW for a bedroom, 3.5 kW for a large bedroom or small living room, and 5 to 7.1 kW for open-plan living. West glass and poor insulation push it up. Use the size calculator for your room.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes