6.0 kW split systems
134
models on the register
Short answer
134 6.0 kW split systems are registered for sale in Australia in 2026, from 6 to 6.3 kW. Supplied and installed, most land between $2,400 to $3,600; up to three licensed local installers will quote your actual job.
Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.
Compare 3 quotes for my houseAt a glance
- Models134from 15 brands
- Installed, estimate$2,400–$3,600
- Quietest indoorsMitsubishi Heavy Industries DXK21ZRA-WF157 dB(A), 6.3 kW
- Most efficient (average zone)ActronAir WRE-060DS4.5 cooling stars, 6 kW
- Reverse cycle90%heat and cool
- R32 refrigerant99%the current low-GWP standard
6.0 kW
134 models · installed $2,400–$3,600
| Brand | Model (outdoor / indoor) | Type | Cool kW | Heat kW | Cool stars | Heat stars | Indoor dB | Installed, estimate | Quote |
|---|---|---|---|---|---|---|---|---|---|
| ActronAir | WRC-060DS / WRE-060DS | Wall split | 6 | 6.6 | 4.5★ | 3★ | 61.9 | $2,400–$3,600 | Get quotes |
| Midea | MFEP60VB-W/MFEP60VB-N | Wall split | 6 | 6.6 | 4.5★ | 3★ | 61.9 | $2,400–$3,600 | Get quotes |
| Midea | MFEZ60VA-W/MFEZ60VA-N | Wall split | 6 | 6.5 | 4.5★ | 3★ | 62.8 | $2,400–$3,600 | Get quotes |
| Rinnai | HONRPX60/HINRPX60M | Wall split | 6 | 6.5 | 4.5★ | 3★ | 62.8 | $2,400–$3,600 | Get quotes |
| Daikin | RKM60W2VMA / FTKM60W2VMA | Wall split, cooling only | 6 | – | 4.5★ | – | 64 | $2,400–$3,600 | Get quotes |
| Daikin | RKM60WVMA / FTKM60WVMA | Wall split, cooling only | 6 | – | 4.5★ | – | 64 | $2,400–$3,600 | Get quotes |
Every model on the Energy Rating register marked available in Australia. Stars are the zoned label for the average climate zone (average zone); indoor noise is the registered sound power level, measured the same way for every model. Installed prices are estimated 2026 supply-and-install ranges, not quotes (how we estimate them); your installer confirms the number. Browse and filter everything in the full catalogue.
FAQ
6.0 kW split systems: common questions
How much does a 6.0 kW split system cost installed?
Typically $2,400 to $3,600 supplied and installed in 2026, depending on size and the job. 6.0 kW: $2,400 to $3,600. Pipe runs, a new circuit or a second storey add to it. Get up to three local quotes for your actual job.
Which is the quietest 6.0 kW split systems?
On the registered indoor sound level, the Mitsubishi Heavy Industries DXK21ZRA-WF1 (6.3 kW) is the quietest at 57 dB(A). Compare within the same size: bigger units are louder. See the quietest split systems ranking.
Which is the most energy efficient?
For the average climate zone, the ActronAir WRE-060DS (6 kW) has the highest cooling rating here at 4.5 stars. Star ratings on the zoned label run to 10, and a star is worth more in a hot zone than a mild one. For cold-climate heating, the Daikin FTXM60AVMA leads at 2.5 stars.
What size split system do I need?
Roughly 2.5 kW for a bedroom, 3.5 kW for a large bedroom or small living room, and 5 to 7.1 kW for open-plan living. West glass and poor insulation push it up. Use the size calculator for your room.
Get quotes for your air con
Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.
Compare 3 quotes