Mitsubishi Heavy Industries logo

Mitsubishi Heavy Industries 10 kW under-ceiling

$3,400–$4,800

estimated installed price

FDC100VSA-W / FDT100VH Also sold as FDCA100VSA -W / FDT100VH, FDT100VH / FDC(A)100VSA-W
Mitsubishi Heavy Industries FDC100VSA-W / FDT100VH indoor unit
Image: Mitsubishi Heavy Industries. Shows this model family; sizes look alike

Cooling

10 kW

3 stars

Heating

11.2 kW

3 stars

Indoor noise

62

dB(A) sound power, quieter than 52% of its size

Running cost

$731

a year, average zone, at 33c/kWh

Short answer

The Mitsubishi Heavy Industries 10 kW under-ceiling (FDC100VSA-W / FDT100VH) is a 10 kW reverse cycle under-ceiling rated 3 stars for cooling and 3 stars for heating in the average climate zone. Installed, expect $3,400 to $4,800; the label's figures put running costs near $731 a year in an average-zone home.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Full specifications

Brand
Mitsubishi Heavy Industries
Model numbers
FDC100VSA-W / FDT100VH, FDCA100VSA -W / FDT100VH, FDT100VH / FDC(A)100VSA-W
Type
Under-ceiling, reverse cycle (heats and cools)
Cooling capacity
10 kW
Cooling power input
2.73 kW
Heating capacity
11.2 kW
Heating power input
2.54 kW
Annual efficiency, cooling (AEER)
3.62
Annual efficiency, heating (ACOP)
4.35
Indoor sound power
62 dB(A)
Outdoor sound power
69 dB(A)
Refrigerant
R32
Power supply
Three-phase
Demand response capable
Yes
Country of manufacture
Thailand
Energy Rating registration
AAC9789
Registration valid until
2031-01-29

Star ratings and running cost by climate

The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.

Climate zone Cooling stars Heating stars Energy a year Cost a year
HotBrisbane, Darwin 3.5 stars 3.5 stars 2,722 kWh 2512 cooling, 210 heating $898
AverageSydney, Adelaide, Perth 3 stars 3 stars 2,213 kWh 869 cooling, 1344 heating $731
ColdCanberra, Hobart, Melbourne 3 stars 2.5 stars 4,192 kWh 552 cooling, 3640 heating $1,383

How it compares with other 9 kW and up units

See the quietest and most efficient rankings.

Alternatives at 9 kW and up from other brands

FAQ

Mitsubishi Heavy Industries FDC100VSA-W / FDT100VH: common questions

How much does the Mitsubishi Heavy Industries 10 kW under-ceiling cost installed?

Typically $3,400 to $4,800 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.

How much does the Mitsubishi Heavy Industries 10 kW under-ceiling cost to run?

Using the energy label's annual figures at 33c/kWh: about $898 a year in a hot zone, $731 in an average zone and $1,383 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.

Where is the Mitsubishi Heavy Industries FDC100VSA-W / FDT100VH made?

The Energy Rating register lists the country of manufacture as Thailand.

Is the Mitsubishi Heavy Industries 10 kW under-ceiling quiet?

Its registered indoor sound power is 62 dB(A), against a median of 63 dB(A) for 9 kW and up under-ceiling units, so it's quieter than about 52% of them. Brochures quote a lower sound pressure figure on the lowest fan speed; the register measures every model the same way.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes