Midea logo

Midea 3.5 kW split system

$1,700–$2,700

estimated installed price

MFXP35WA/MFXP35NA Also sold as MFXS35WA/MFXS35NA

Cooling

3.5 kW

5 stars

Heating

3.8 kW

3 stars

Indoor noise

56.4

dB(A) sound power, quieter than 58% of its size

Running cost

$210

a year, average zone, at 33c/kWh

Short answer

The Midea 3.5 kW split system (MFXP35WA/MFXP35NA) is a 3.5 kW reverse cycle wall split rated 5 stars for cooling and 3 stars for heating in the average climate zone. Installed, expect $1,700 to $2,700; the label's figures put running costs near $210 a year in an average-zone home.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Full specifications

Brand
Midea
Model numbers
MFXP35WA/MFXP35NA, MFXS35WA/MFXS35NA
Type
Wall split, reverse cycle (heats and cools)
Cooling capacity
3.5 kW
Cooling power input
0.8 kW
Heating capacity
3.8 kW
Heating power input
0.84 kW
Annual efficiency, cooling (AEER)
4.36
Annual efficiency, heating (ACOP)
4.45
Indoor sound power
56.4 dB(A)
Outdoor sound power
58.5 dB(A)
Refrigerant
R32
Power supply
Single-phase
Demand response capable
Yes
Country of manufacture
China
Energy Rating registration
ZAC0806
Registration valid until
2124-10-05

Star ratings and running cost by climate

The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.

Climate zone Cooling stars Heating stars Energy a year Cost a year
HotBrisbane, Darwin 5 stars 4 stars 713 kWh 656 cooling, 57 heating $235
AverageSydney, Adelaide, Perth 5 stars 3 stars 635 kWh 218 cooling, 417 heating $210
ColdCanberra, Hobart, Melbourne 5.5 stars 2.5 stars 1,276 kWh 138 cooling, 1138 heating $422

How it compares with other 3.5 kW units

See the quietest and most efficient rankings.

Alternatives at 3.5 kW from other brands

FAQ

Midea MFXP35WA/MFXP35NA: common questions

How much does the Midea 3.5 kW split system cost installed?

Typically $1,700 to $2,700 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.

How much does the Midea 3.5 kW split system cost to run?

Using the energy label's annual figures at 33c/kWh: about $235 a year in a hot zone, $210 in an average zone and $422 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.

Where is the Midea MFXP35WA/MFXP35NA made?

The Energy Rating register lists the country of manufacture as China.

Is the Midea 3.5 kW split system quiet?

Its registered indoor sound power is 56.4 dB(A), against a median of 57 dB(A) for 3.5 kW wall split units, so it's quieter than about 58% of them. Brochures quote a lower sound pressure figure on the lowest fan speed; the register measures every model the same way.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes