Mitsubishi Heavy Industries logo

Mitsubishi Heavy Industries 3.5 kW split systems

30

models on the register

Every current Mitsubishi Heavy Industries 3.5 kW split system in Australia compared on stars, noise and heating, with the typical installed price. Get up to 3 local quotes.

Short answer

30 Mitsubishi Heavy Industries 3.5 kW split systems are registered for sale in Australia in 2026, from 3.2 to 3.5 kW. Supplied and installed, most land between $1,700 to $2,700; up to three licensed local installers will quote your actual job.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

At a glance

3.5 kW

30 models · installed $1,700–$2,700

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
SRC35ZSPA-W/SRK35ZSPA-W Wall split 3.2 3.6 2.5★ 2.5★ 57 $1,700–$2,700 Get quotes
DXC12ZTLA-W/DXK12ZTLA-W +5 variants with the same ratings Wall split 3.3 3.8 3★ 3★ 59 $1,700–$2,700 Get quotes
DXC12ZSA-W / DXK12ZSA-W +5 variants with the same ratings Wall split 3.5 3.7 3.5★ 3★ 57 $1,700–$2,700 Get quotes
DXC12ZSA-W/DXK12ZSA-WF1 +2 variants with the same ratings Wall split 3.5 3.7 4★ 3★ 57 $1,700–$2,700 Get quotes
SRC13YSA-W / SRK13YSA-WF +1 variant with the same ratings Wall split, cooling only 3.5 – 3.5★ – 56 $1,700–$2,700 Get quotes
SRC13YSA-W/SRK13YSA-WF1 Wall split, cooling only 3.5 – 4★ – 56 $1,700–$2,700 Get quotes
SRC13YTA-W/SRK13YTA-WF Wall split, cooling only 3.5 – 4★ – 52 $1,700–$2,700 Get quotes
SRC35ZSA-W / SRR35ZS-W Wall split 3.5 4.2 3★ 2.5★ 57 $1,700–$2,700 Get quotes
SRC35ZSXA-W / SRK35ZSXA-W +1 variant with the same ratings Wall split 3.5 4.3 4★ 3.5★ 58 $1,700–$2,700 Get quotes
SRC35ZTA-W* / SRK35ZTA-WF* +6 variants with the same ratings Wall split 3.5 4 4.5★ 3★ 52 $1,700–$2,700 Get quotes

Every model on the Energy Rating register marked available in Australia. Stars are the zoned label for the average climate zone (average zone); indoor noise is the registered sound power level, measured the same way for every model. Installed prices are estimated 2026 supply-and-install ranges, not quotes (how we estimate them); your installer confirms the number. Browse and filter everything in the full catalogue.

FAQ

Mitsubishi Heavy Industries 3.5 kW split systems: common questions

How much does a Mitsubishi Heavy Industries 3.5 kW split system cost installed?

Typically $1,700 to $2,700 supplied and installed in 2026, depending on size and the job. 3.5 kW: $1,700 to $2,700. Pipe runs, a new circuit or a second storey add to it. Get up to three local quotes for your actual job.

Which is the quietest Mitsubishi Heavy Industries 3.5 kW split systems?

On the registered indoor sound level, the Mitsubishi Heavy Industries SRK13YTA-WF (3.5 kW) is the quietest at 52 dB(A). Compare within the same size: bigger units are louder. See the quietest split systems ranking.

Which is the most energy efficient?

For the average climate zone, the Mitsubishi Heavy Industries SRK35ZTA-WF* (3.5 kW) has the highest cooling rating here at 4.5 stars. Star ratings on the zoned label run to 10, and a star is worth more in a hot zone than a mild one. For cold-climate heating, the Mitsubishi Heavy Industries SRK35ZSXA-W leads at 3 stars.

What size split system do I need?

Roughly 2.5 kW for a bedroom, 3.5 kW for a large bedroom or small living room, and 5 to 7.1 kW for open-plan living. West glass and poor insulation push it up. Use the size calculator for your room.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes