MHI Akari Bulkhead logo

MHI Akari Bulkhead

4

models on the register

MHI Akari Bulkhead range in Australia: all 4 registered sizes with capacity, star ratings and noise, plus typical installed prices. Compare up to 3 local quotes.
MHI Akari Bulkhead indoor unit
Image: Mitsubishi Heavy Industries

Short answer

4 MHI Akari Bulkhead models are registered for sale in Australia in 2026, from 2.5 to 5.6 kW. Supplied and installed, most land between $1,700 to $4,800; up to three licensed local installers will quote your actual job.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Akari is MHI's bulkhead ducted unit for one or two rooms. It hides in a bulkhead so only the grilles show.

At a glance

2.5 kW

1 models · installed $1,500–$2,500 · size page

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
SRC25ZSA-W / SRR25ZS-W Floor/ceiling console 2.5 3.4 3★ 3★ 56 $2,800–$4,800 Get quotes

3.5 kW

1 models · installed $1,700–$2,700 · size page

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
SRC35ZSA-W / SRR35ZS-W Wall split 3.5 4.2 3★ 2.5★ 57 $1,700–$2,700 Get quotes

5.0 kW

1 models · installed $2,100–$3,300 · size page

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
SRC50ZSXA-W/SRR50ZS-W Floor/ceiling console 5 5.4 3★ 2.5★ 59 $2,800–$4,800 Get quotes

6.0 kW

1 models · installed $2,400–$3,600 · size page

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
SRC60ZSXA-W / SRR60ZS-W Floor/ceiling console 5.6 6.7 2.5★ 2.5★ 60 $2,800–$4,800 Get quotes

Every model on the Energy Rating register marked available in Australia. Stars are the zoned label for the average climate zone (average zone); indoor noise is the registered sound power level, measured the same way for every model. Installed prices are estimated 2026 supply-and-install ranges, not quotes (how we estimate them); your installer confirms the number. Browse and filter everything in the full catalogue.

FAQ

MHI Akari Bulkhead: common questions

How much does a MHI Akari Bulkhead model cost installed?

Typically $1,700 to $4,800 supplied and installed in 2026, depending on size and the job. 2.5 kW: $1,500 to $2,500; 3.5 kW: $1,700 to $2,700; 5.0 kW: $2,100 to $3,300; 6.0 kW: $2,400 to $3,600. Pipe runs, a new circuit or a second storey add to it. Get up to three local quotes for your actual job.

Which is the quietest MHI Akari Bulkhead models?

On the registered indoor sound level, the Mitsubishi Heavy Industries SRR25ZS-W (2.5 kW) is the quietest at 56 dB(A). Compare within the same size: bigger units are louder. See the quietest split systems ranking.

Which is the most energy efficient?

For the average climate zone, the Mitsubishi Heavy Industries SRR25ZS-W (2.5 kW) has the highest cooling rating here at 3 stars. Star ratings on the zoned label run to 10, and a star is worth more in a hot zone than a mild one. For cold-climate heating, the Mitsubishi Heavy Industries SRR25ZS-W leads at 2.5 stars.

What size split system do I need?

Roughly 2.5 kW for a bedroom, 3.5 kW for a large bedroom or small living room, and 5 to 7.1 kW for open-plan living. West glass and poor insulation push it up. Use the size calculator for your room.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes