Rinnai J Series logo

Rinnai J Series

5

models on the register

Rinnai J Series range in Australia: all 5 registered sizes with capacity, star ratings and noise, plus typical installed prices. Compare up to 3 local quotes.
Rinnai J Series indoor unit
Image: Rinnai

Short answer

5 Rinnai J Series models are registered for sale in Australia in 2026, from 2.6 to 8 kW. Supplied and installed, most land between $1,500 to $4,300; up to three licensed local installers will quote your actual job.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

The J Series is Rinnai's reverse cycle wall split designed for Australian conditions. It suits bedrooms and smaller living areas.

At a glance

2.5 kW

1 models · installed $1,500–$2,500

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
HONRJ25B / HINRJ25B Wall split 2.6 2.9 7★ 3★ 54.3 $1,500–$2,500 Get quotes

3.5 kW

1 models · installed $1,700–$2,700

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
HONRJ35B / HINRJ35B Wall split 3.5 4 5★ 2.5★ 56.8 $1,700–$2,700 Get quotes

5.0 kW

1 models · installed $2,100–$3,300

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
HONRJ50B / HINRJ50B Wall split 5.2 5.2 4★ 2.5★ 60.6 $2,100–$3,300 Get quotes

7.1 kW

1 models · installed $2,600–$3,900

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
HONRJ70B / HINRJ70B Wall split 7 8.2 3.5★ 2★ 63.7 $2,600–$3,900 Get quotes

8.0 kW

1 models · installed $3,000–$4,300

Model (outdoor / indoor) Type Cool kW Heat kW Cool stars Heat stars Indoor dB Installed, estimate Quote
HONRJ80B / HINRJ80B Wall split 8 8.4 2.5★ 2★ 64.7 $3,000–$4,300 Get quotes

Every model on the Energy Rating register marked available in Australia. Stars are the zoned label for the average climate zone (average zone); indoor noise is the registered sound power level, measured the same way for every model. Installed prices are estimated 2026 supply-and-install ranges, not quotes (how we estimate them); your installer confirms the number. Browse and filter everything in the full catalogue.

FAQ

Rinnai J Series: common questions

How much does a Rinnai J Series model cost installed?

Typically $1,500 to $4,300 supplied and installed in 2026, depending on size and the job. 2.5 kW: $1,500 to $2,500; 3.5 kW: $1,700 to $2,700; 5.0 kW: $2,100 to $3,300; 7.1 kW: $2,600 to $3,900. Pipe runs, a new circuit or a second storey add to it. Get up to three local quotes for your actual job.

Which is the quietest Rinnai J Series models?

On the registered indoor sound level, the Rinnai HINRJ25B (2.6 kW) is the quietest at 54.3 dB(A). Compare within the same size: bigger units are louder. See the quietest split systems ranking.

Which is the most energy efficient?

For the average climate zone, the Rinnai HINRJ25B (2.6 kW) has the highest cooling rating here at 7 stars. Star ratings on the zoned label run to 10, and a star is worth more in a hot zone than a mild one. For cold-climate heating, the Rinnai HINRJ25B leads at 2.5 stars.

What size split system do I need?

Roughly 2.5 kW for a bedroom, 3.5 kW for a large bedroom or small living room, and 5 to 7.1 kW for open-plan living. West glass and poor insulation push it up. Use the size calculator for your room.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes