Mitsubishi Electric logo

Mitsubishi Electric AP Series 2 kW split system

$1,400–$2,400

estimated installed price

MUZ-AP20VG*/MSZ-AP20VGD Series Also sold as MUZ-AP20VG/MSZ-AP20VGD, MUZ-AP20VGD/MSZ-AP20VGD
Mitsubishi Electric AP Series indoor unit
Image: Mitsubishi Electric. Shows the Mitsubishi Electric AP Series range; sizes look alike

Cooling

2 kW

3.5 stars

Heating

2.5 kW

2.5 stars

Indoor noise

52

dB(A) sound power, quieter than 51% of its size

Running cost

$159

a year, average zone, at 33c/kWh

Short answer

The Mitsubishi Electric AP Series 2 kW split system (MUZ-AP20VG*/MSZ-AP20VGD Series) is a 2 kW reverse cycle wall split rated 3.5 stars for cooling and 2.5 stars for heating in the average climate zone. Installed, expect $1,400 to $2,400; the label's figures put running costs near $159 a year in an average-zone home.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Full specifications

Brand
Mitsubishi Electric
Series
Mitsubishi Electric AP Series
Model numbers
MUZ-AP20VG*/MSZ-AP20VGD Series, MUZ-AP20VG/MSZ-AP20VGD, MUZ-AP20VGD/MSZ-AP20VGD
Type
Wall split, reverse cycle (heats and cools)
Cooling capacity
2 kW
Cooling power input
0.46 kW
Heating capacity
2.5 kW
Heating power input
0.6 kW
Annual efficiency, cooling (AEER)
4.32
Annual efficiency, heating (ACOP)
4.14
Indoor sound power
52 dB(A)
Outdoor sound power
55 dB(A)
Refrigerant
R32
Power supply
Single-phase
Demand response capable
No
Country of manufacture
Thailand
Energy Rating registration
AAC8766
Registration valid until
2030-05-07

Star ratings and running cost by climate

The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.

Climate zone Cooling stars Heating stars Energy a year Cost a year
HotBrisbane, Darwin 3.5 stars 3 stars 522 kWh 474 cooling, 48 heating $172
AverageSydney, Adelaide, Perth 3.5 stars 2.5 stars 481 kWh 161 cooling, 320 heating $159
ColdCanberra, Hobart, Melbourne 3.5 stars 2 stars 936 kWh 104 cooling, 832 heating $309

How it compares with other 2.0 kW units

See the quietest and most efficient rankings.

Other sizes in the Mitsubishi Electric AP Series range

Alternatives at 2.0 kW from other brands

FAQ

Mitsubishi Electric MUZ-AP20VG*/MSZ-AP20VGD Series: common questions

How much does the Mitsubishi Electric AP Series 2 kW split system cost installed?

Typically $1,400 to $2,400 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.

How much does the Mitsubishi Electric AP Series 2 kW split system cost to run?

Using the energy label's annual figures at 33c/kWh: about $172 a year in a hot zone, $159 in an average zone and $309 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.

Where is the Mitsubishi Electric MUZ-AP20VG*/MSZ-AP20VGD Series made?

The Energy Rating register lists the country of manufacture as Thailand.

Is the Mitsubishi Electric AP Series 2 kW split system quiet?

Its registered indoor sound power is 52 dB(A), against a median of 52.4 dB(A) for 2.0 kW wall split units, so it's quieter than about 51% of them. Brochures quote a lower sound pressure figure on the lowest fan speed; the register measures every model the same way.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes