Midea logo

Midea EOS 2.6 kW split system

$1,500–$2,500

estimated installed price

MFEP26VB-W/MFEP26VB-N
Midea EOS indoor unit
Image: Midea. Shows the Midea EOS range; sizes look alike

Cooling

2.6 kW

6.5 stars

Heating

2.7 kW

3.5 stars

Indoor noise

56.6

dB(A) sound power, quieter than 12% of its size

Running cost

$133

a year, average zone, at 33c/kWh

Short answer

The Midea EOS 2.6 kW split system (MFEP26VB-W/MFEP26VB-N) is a 2.6 kW reverse cycle wall split rated 6.5 stars for cooling and 3.5 stars for heating in the average climate zone. Installed, expect $1,500 to $2,500; the label's figures put running costs near $133 a year in an average-zone home.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Full specifications

Brand
Midea
Series
Midea EOS
Model numbers
MFEP26VB-W/MFEP26VB-N
Type
Wall split, reverse cycle (heats and cools)
Cooling capacity
2.6 kW
Cooling power input
0.487 kW
Heating capacity
2.7 kW
Heating power input
0.499 kW
Annual efficiency, cooling (AEER)
5.38
Annual efficiency, heating (ACOP)
5.39
Indoor sound power
56.6 dB(A)
Outdoor sound power
63.7 dB(A)
Refrigerant
R32
Power supply
Single-phase
Demand response capable
Yes
Country of manufacture
China
Energy Rating registration
AAC8874
Registration valid until
2030-05-21

Star ratings and running cost by climate

The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.

Climate zone Cooling stars Heating stars Energy a year Cost a year
HotBrisbane, Darwin 7 stars 4 stars 423 kWh 383 cooling, 40 heating $139
AverageSydney, Adelaide, Perth 6.5 stars 3.5 stars 404 kWh 133 cooling, 271 heating $133
ColdCanberra, Hobart, Melbourne 7 stars 3.5 stars 790 kWh 84 cooling, 706 heating $261

How it compares with other 2.5 kW units

See the quietest and most efficient rankings.

Other sizes in the Midea EOS range

Alternatives at 2.5 kW from other brands

FAQ

Midea MFEP26VB-W/MFEP26VB-N: common questions

How much does the Midea EOS 2.6 kW split system cost installed?

Typically $1,500 to $2,500 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.

How much does the Midea EOS 2.6 kW split system cost to run?

Using the energy label's annual figures at 33c/kWh: about $139 a year in a hot zone, $133 in an average zone and $261 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.

Where is the Midea MFEP26VB-W/MFEP26VB-N made?

The Energy Rating register lists the country of manufacture as China.

Is the Midea EOS 2.6 kW split system quiet?

Its registered indoor sound power is 56.6 dB(A), against a median of 54.5 dB(A) for 2.5 kW wall split units, so it's quieter than about 12% of them. Brochures quote a lower sound pressure figure on the lowest fan speed; the register measures every model the same way.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes