Kaden logo

Kaden 2 kW split system

$1,400–$2,400

estimated installed price

KSI-2.0
Kaden KSI-2.0 indoor unit
Image: Kaden. Shows this model family; sizes look alike

Cooling

2 kW

4.5 stars

Heating

2.4 kW

3 stars

Indoor noise

52.9

dB(A) sound power, quieter than 39% of its size

Running cost

$133

a year, average zone, at 33c/kWh

Short answer

The Kaden 2 kW split system (KSI-2.0) is a 2 kW reverse cycle wall split rated 4.5 stars for cooling and 3 stars for heating in the average climate zone. Installed, expect $1,400 to $2,400; the label's figures put running costs near $133 a year in an average-zone home.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Full specifications

Brand
Kaden
Model numbers
KSI-2.0
Type
Wall split, reverse cycle (heats and cools)
Cooling capacity
2 kW
Cooling power input
0.441 kW
Heating capacity
2.4 kW
Heating power input
0.51 kW
Annual efficiency, cooling (AEER)
4.63
Annual efficiency, heating (ACOP)
4.63
Indoor sound power
52.9 dB(A)
Outdoor sound power
56 dB(A)
Refrigerant
R32
Power supply
Single-phase
Demand response capable
Yes
Country of manufacture
China
Energy Rating registration
AAC9134
Registration valid until
2030-07-29

Star ratings and running cost by climate

The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.

Climate zone Cooling stars Heating stars Energy a year Cost a year
HotBrisbane, Darwin 5 stars 3.5 stars 433 kWh 394 cooling, 39 heating $143
AverageSydney, Adelaide, Perth 4.5 stars 3 stars 403 kWh 136 cooling, 267 heating $133
ColdCanberra, Hobart, Melbourne 5 stars 2.5 stars 778 kWh 87 cooling, 691 heating $257

How it compares with other 2.0 kW units

See the quietest and most efficient rankings.

Alternatives at 2.0 kW from other brands

FAQ

Kaden KSI-2.0: common questions

How much does the Kaden 2 kW split system cost installed?

Typically $1,400 to $2,400 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.

How much does the Kaden 2 kW split system cost to run?

Using the energy label's annual figures at 33c/kWh: about $143 a year in a hot zone, $133 in an average zone and $257 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.

Where is the Kaden KSI-2.0 made?

The Energy Rating register lists the country of manufacture as China.

Is the Kaden 2 kW split system quiet?

Its registered indoor sound power is 52.9 dB(A), against a median of 52.4 dB(A) for 2.0 kW wall split units, so it's quieter than about 39% of them. Brochures quote a lower sound pressure figure on the lowest fan speed; the register measures every model the same way.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes