Hisense logo

Hisense X3 2.5 kW split system

$1,500–$2,500

estimated installed price

HAWJ9KR
Hisense X3 indoor unit
Image: Hisense. Shows the Hisense X3 range; sizes look alike

Cooling

2.5 kW

4 stars

Heating

3.1 kW

3 stars

Indoor noise

59

dB(A) sound power, quieter than 3% of its size

Running cost

$180

a year, average zone, at 33c/kWh

Short answer

The Hisense X3 2.5 kW split system (HAWJ9KR) is a 2.5 kW reverse cycle wall split rated 4 stars for cooling and 3 stars for heating in the average climate zone. Installed, expect $1,500 to $2,500; the label's figures put running costs near $180 a year in an average-zone home.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Full specifications

Brand
Hisense
Series
Hisense X3
Model numbers
HAWJ9KR
Type
Wall split, reverse cycle (heats and cools)
Cooling capacity
2.5 kW
Cooling power input
0.62 kW
Heating capacity
3.1 kW
Heating power input
0.69 kW
Annual efficiency, cooling (AEER)
3.99
Annual efficiency, heating (ACOP)
4.45
Indoor sound power
59 dB(A)
Outdoor sound power
60 dB(A)
Refrigerant
R32
Power supply
Single-phase
Demand response capable
Yes
Country of manufacture
China
Energy Rating registration
AAC6350
Registration valid until
2026-11-17

Star ratings and running cost by climate

The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.

Climate zone Cooling stars Heating stars Energy a year Cost a year
HotBrisbane, Darwin 4.5 stars 3.5 stars 561 kWh 505 cooling, 56 heating $185
AverageSydney, Adelaide, Perth 4 stars 3 stars 548 kWh 177 cooling, 371 heating $180
ColdCanberra, Hobart, Melbourne 4.5 stars 2 stars 1,135 kWh 110 cooling, 1025 heating $374

How it compares with other 2.5 kW units

See the quietest and most efficient rankings.

Other sizes in the Hisense X3 range

Alternatives at 2.5 kW from other brands

FAQ

Hisense HAWJ9KR: common questions

How much does the Hisense X3 2.5 kW split system cost installed?

Typically $1,500 to $2,500 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.

How much does the Hisense X3 2.5 kW split system cost to run?

Using the energy label's annual figures at 33c/kWh: about $185 a year in a hot zone, $180 in an average zone and $374 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.

Where is the Hisense HAWJ9KR made?

The Energy Rating register lists the country of manufacture as China.

Is the Hisense X3 2.5 kW split system quiet?

Its registered indoor sound power is 59 dB(A), against a median of 54.5 dB(A) for 2.5 kW wall split units, so it's quieter than about 3% of them. Brochures quote a lower sound pressure figure on the lowest fan speed; the register measures every model the same way.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes