Braemar logo

Braemar 8.2 kW split system

$3,000–$4,300

estimated installed price

TCHV80T1S/TSHV80T1S
Braemar TCHV80T1S/TSHV80T1S indoor unit
Image: Braemar. Shows this model family; sizes look alike

Cooling

8.2 kW

3 stars

Heating

8.5 kW

2.5 stars

Indoor noise

52

dB(A) sound power, quieter than 95% of its size

Running cost

$580

a year, average zone, at 33c/kWh

Short answer

The Braemar 8.2 kW split system (TCHV80T1S/TSHV80T1S) is a 8.2 kW reverse cycle wall split rated 3 stars for cooling and 2.5 stars for heating in the average climate zone. Installed, expect $3,000 to $4,300; the label's figures put running costs near $580 a year in an average-zone home.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Full specifications

Brand
Braemar
Model numbers
TCHV80T1S/TSHV80T1S
Type
Wall split, reverse cycle (heats and cools)
Cooling capacity
8.2 kW
Cooling power input
2.3 kW
Heating capacity
8.5 kW
Heating power input
2.3 kW
Heating output at 2°C outside
7.9 kW
Annual efficiency, cooling (AEER)
3.54
Annual efficiency, heating (ACOP)
3.67
Indoor sound power
52 dB(A)
Outdoor sound power
64.8 dB(A)
Refrigerant
R32
Power supply
Single-phase
Demand response capable
Yes
Country of manufacture
China
Energy Rating registration
AAC8345
Registration valid until
2029-07-10

Star ratings and running cost by climate

The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.

Climate zone Cooling stars Heating stars Energy a year Cost a year
HotBrisbane, Darwin 3.5 stars 3.5 stars 2,158 kWh 2005 cooling, 153 heating $712
AverageSydney, Adelaide, Perth 3 stars 2.5 stars 1,758 kWh 688 cooling, 1070 heating $580
ColdCanberra, Hobart, Melbourne 3.5 stars 2 stars 3,401 kWh 433 cooling, 2968 heating $1,122

How it compares with other 8.0 kW units

See the quietest and most efficient rankings.

Alternatives at 8.0 kW from other brands

FAQ

Braemar TCHV80T1S/TSHV80T1S: common questions

How much does the Braemar 8.2 kW split system cost installed?

Typically $3,000 to $4,300 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.

How much does the Braemar 8.2 kW split system cost to run?

Using the energy label's annual figures at 33c/kWh: about $712 a year in a hot zone, $580 in an average zone and $1,122 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.

Where is the Braemar TCHV80T1S/TSHV80T1S made?

The Energy Rating register lists the country of manufacture as China.

Is the Braemar 8.2 kW split system quiet?

Its registered indoor sound power is 52 dB(A), against a median of 64.6 dB(A) for 8.0 kW wall split units, so it's quieter than about 95% of them. Brochures quote a lower sound pressure figure on the lowest fan speed; the register measures every model the same way.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes