Braemar 10.5 kW ducted system
$8,000–$15,000
estimated installed price
Cooling
10.5 kW
3.5 stars
Heating
12.5 kW
2.5 stars
Indoor noise
–
dB(A) sound power
Running cost
$796
a year, average zone, at 33c/kWh
Short answer
The Braemar 10.5 kW ducted system (FCHA100D3G/FDHA100D1S) is a 10.5 kW reverse cycle ducted rated 3.5 stars for cooling and 2.5 stars for heating in the average climate zone. Installed, expect $8,000 to $15,000; the label's figures put running costs near $796 a year in an average-zone home.
Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.
Compare 3 quotes for my houseFull specifications
- Brand
- Braemar
- Model numbers
- FCHA100D3G/FDHA100D1S
- Type
- Ducted, reverse cycle (heats and cools)
- Cooling capacity
- 10.5 kW
- Cooling power input
- 2.48 kW
- Heating capacity
- 12.5 kW
- Heating power input
- 2.9 kW
- Annual efficiency, cooling (AEER)
- 4.18
- Annual efficiency, heating (ACOP)
- 4.26
- Indoor sound power
- –
- Outdoor sound power
- 69.7 dB(A)
- Refrigerant
- R32
- Power supply
- Three-phase
- Demand response capable
- Yes
- Country of manufacture
- China
- Energy Rating registration
- AAC10418
- Registration valid until
- 2031-08-19
Star ratings and running cost by climate
The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.
| Climate zone | Cooling stars | Heating stars | Energy a year | Cost a year |
|---|---|---|---|---|
| HotBrisbane, Darwin | 4 stars | 3 stars | 2,707 kWh 2466 cooling, 241 heating | $894 |
| AverageSydney, Adelaide, Perth | 3.5 stars | 2.5 stars | 2,412 kWh 857 cooling, 1555 heating | $796 |
| ColdCanberra, Hobart, Melbourne | 3.5 stars | 2 stars | 4,758 kWh 556 cooling, 4202 heating | $1,570 |
How it compares with other 10 to 14 kW units
- Cooling stars (average zone): 3.5 against a median of 2.5 across 473 10 to 14 kW ducted units, better than 88% of them.
- Estimated installed price for this size: $8,000 to $15,000. Brand and install difficulty move it within that band.
See the quietest and most efficient rankings.
Alternatives at 10 to 14 kW from other brands
Brivis 13.6 kW ducted system
AONSR15B1/AINHU15B1
5 stars cooling · – dB(A)
Brivis 10.3 kW ducted system
AONSR13B1/AINHU11B1
4.5 stars cooling · – dB(A)
ActronAir 10.5 kW ducted system
LRC-100CS / LRE-100CS
4 stars cooling · – dB(A)
Brivis 12 kW ducted system
AONSR13B1/AINHU13B1
4 stars cooling · – dB(A)
Carrier 12.5 kW ducted system
38QSV125N8E/42QSV125N8H
4 stars cooling · – dB(A)
Kaden 10.5 kW ducted system
KDI36 / KDI36
4 stars cooling · – dB(A)
FAQ
Braemar FCHA100D3G/FDHA100D1S: common questions
How much does the Braemar 10.5 kW ducted system cost installed?
Typically $8,000 to $15,000 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.
How much does the Braemar 10.5 kW ducted system cost to run?
Using the energy label's annual figures at 33c/kWh: about $894 a year in a hot zone, $796 in an average zone and $1,570 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.
Where is the Braemar FCHA100D3G/FDHA100D1S made?
The Energy Rating register lists the country of manufacture as China.
Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.
Get quotes for your air con
Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.
Compare 3 quotes