ActronAir logo

ActronAir Serene 9 kW split system

$3,400–$4,800

estimated installed price

WRC-090DS / WRE-090DS
ActronAir Serene indoor unit
Image: ActronAir. Shows the ActronAir Serene range; sizes look alike

Cooling

9 kW

4 stars

Heating

9.8 kW

2.5 stars

Indoor noise

64.8

dB(A) sound power, quieter than 47% of its size

Running cost

$640

a year, average zone, at 33c/kWh

Short answer

The ActronAir Serene 9 kW split system (WRC-090DS / WRE-090DS) is a 9 kW reverse cycle wall split rated 4 stars for cooling and 2.5 stars for heating in the average climate zone. Installed, expect $3,400 to $4,800; the label's figures put running costs near $640 a year in an average-zone home.

Prices are estimates, not quotes (how we estimate them). Rebate rules checked September 2026.

Compare 3 quotes for my house

Full specifications

Brand
ActronAir
Series
ActronAir Serene
Model numbers
WRC-090DS / WRE-090DS
Type
Wall split, reverse cycle (heats and cools)
Cooling capacity
9 kW
Cooling power input
2.55 kW
Heating capacity
9.8 kW
Heating power input
2.64 kW
Annual efficiency, cooling (AEER)
3.53
Annual efficiency, heating (ACOP)
3.71
Indoor sound power
64.8 dB(A)
Outdoor sound power
69.7 dB(A)
Refrigerant
R32
Power supply
Single-phase
Demand response capable
Yes
Country of manufacture
China
Energy Rating registration
AAC9014
Registration valid until
2030-06-17

Star ratings and running cost by climate

The Zoned Energy Rating Label rates each unit for three climates. Annual energy is the label's estimate for typical use in that zone; the cost applies 33c/kWh, around the 2026–27 default electricity offer. Use the running cost calculator for your own hours and tariff.

Climate zone Cooling stars Heating stars Energy a year Cost a year
HotBrisbane, Darwin 4 stars 3.5 stars 2,218 kWh 2056 cooling, 162 heating $731
AverageSydney, Adelaide, Perth 4 stars 2.5 stars 1,940 kWh 686 cooling, 1254 heating $640
ColdCanberra, Hobart, Melbourne 4 stars 2 stars 3,982 kWh 427 cooling, 3555 heating $1,314

How it compares with other 9 kW and up units

See the quietest and most efficient rankings.

Other sizes in the ActronAir Serene range

Alternatives at 9 kW and up from other brands

FAQ

ActronAir WRC-090DS / WRE-090DS: common questions

How much does the ActronAir Serene 9 kW split system cost installed?

Typically $3,400 to $4,800 supplied and installed in 2026 for a standard job at this size. Longer pipe runs, a new circuit, a second storey or removing an old unit add to it. Get up to three local quotes for your actual install.

How much does the ActronAir Serene 9 kW split system cost to run?

Using the energy label's annual figures at 33c/kWh: about $731 a year in a hot zone, $640 in an average zone and $1,314 in a cold zone. The label assumes typical use; yours will differ with hours, set temperature and insulation.

Where is the ActronAir WRC-090DS / WRE-090DS made?

The Energy Rating register lists the country of manufacture as China.

Is the ActronAir Serene 9 kW split system quiet?

Its registered indoor sound power is 64.8 dB(A), against a median of 64.8 dB(A) for 9 kW and up wall split units, so it's quieter than about 47% of them. Brochures quote a lower sound pressure figure on the lowest fan speed; the register measures every model the same way.

Sources

Brand names and logos are trademarks of their owners, shown to identify the brands we compare. We are independent and not affiliated with any manufacturer.

A quiet Australian living room

Get quotes for your air con

Free and takes about two minutes. Check your rebate, then up to three licensed local installers quote the job.

Compare 3 quotes